| Features |
| Specs |
| Description |
Measurements |
| Readable Disc |
8cm/12cm CD-DA/CD-R/CD-RW(x3) |
| Quantum Bit Rate |
16 Bit |
| Sampling Frequency |
44.1kHz(44.1kHz when pitch bending) |
| Analog Output |
RCA PIN JACK
OUTPUT IMPEDANCE under 1k Ω
OUTPUT LEVEL ?10dBV (0.32V)
MAX OUTPUT LEVEL +6dBV (2.0V) |
| Digital Output |
Coaxial Format: IE C60958 Type(2) |
| Fader Start Terminal |
3.5 mini phone jack |
| TT-LinkTerminal |
Mini DIN Terminal |
| Feature Frequency |
10~20kHz, +0/1.0dB |
| Dynamic Range |
98dB |
| S/N Ratio |
98dB(IHF-A) |
| *1 Reverse play is a maximum
of 7seconds / CUE, CUE point memory, FF.REW cannot be used. |
| *2 If the CD condition is
bad it might not play |
| *3 Copy control cd’s
do not match the standard CD rate and will have trouble been played. |
| *4 All names and makes mentioned
are trademarks of each company. |
| Dimension(s) / Weight |
242(W)×110(D)×300(H) / 5.9kg |
| Power |
DM/100V AC, 50-60Hz |
| *ELECTRICITY CONSUMPTION
: 25W |
|
Functions |
- SOUND QUALITY - VESTAX has developed a new CD filter with its knowledge
of analog records. This new filter creates the warmth of vinyl with
a phat groovy sound, keeping specific sound quality even when it’s
used with kW grade SR systems.
- MP3 READABLE - MP3 tracks can be played (¦1) with the MP3 encoder
that’s built in to the CDX-05. The features that you could only
do on computers such as scratching, +/-100% pitch control, effectors
and sampling can all be done on the CDX-05.
- SCRATCH MODE VIA JOG WHEEL - The operation interface is a jog wheel
that can be used for scratching, pitch bending, rewinding and cueing.
If you are not satisfied with scratching on the jog wheel, you can connect
the TASCAM TT-M1(¦2) to the TT-LINK terminal on the rear panel,
and mount it on any PDX series turntable. Once it’s connected
you can scratch the record on the turntable to scratch the CD.
- DISC MEMORY - Track programs, cue points and loop points can be memorized
up to 100 tracks and if you play a CD that has been played before, the
CDX-05 reads the CDs TOC info and plays it the way it was set before.
(Recordable info: DISC ID, CUE POINT, LOOP POINT, BREAK, MASTER TEMPO,
PLAY MODE, TAP VALUE)
- INDEPENDENT SAMPLER - Maximum of 8 seconds sampling, with ability
to layer the sound over the playing track. CD’s can be changed
without fading the outro, by using the sampling loop function.
- CUE SYSTEM - 4 cue points can be set out via 2 means of selection
(last start position or pause position). CUE 1,2,3 can be played instantly
with the CUE play mode like using a sampler.
- PITCH CONTROL&MASTER TEMPO - The pitch can be controlled with
the 100mm pitch control fader, 0,+/-6,10,50,100% for long mixing and
sound effects so any tracks and styles can be mixed. Master tempo can
be adjusted to +/-50%.
|
- SEAMLESS LOOPS
- LOOP OUT ADJUST
- PITCH BEND (+/-10%)
- BPM COUNTER (AUTO/MANUAL)
- BPM SYNCHRONIZE EFFECT
- DIGITAL EFFECTER (FLANGER/DELAY/FILTER)
- INSTANT REVERSE PLAY
- BRAKE MODE
- BRAKE TIME ADJUST (1`5 sec)
- COAXIAL DIGITAL OUT (for DJ play)
|
- FADER START & BACK CUE
- TIMER START
- PROGRAM EDIT PLAY
- 3 REPEAT MODES
- 3 TIME INDICATION MODES
- USING TTM1 CONTROLLER
- SHOCK PROOF MEMORY
- FACILITY FOR SOFTWARE UPGRADE
- WHITE ON BLACK LCD DISPLAY
- EXTERNAL POWER TRANSFORMER
|
- CDX-05 and TTT-M1 - It sends the platter rotation speed and
start/stop info to the CDX-05, and controls the digital data of
the CD.
- Parameter of the Digital Effecter:
1.FLANGER
EFFECT TIME: 10msec-16sec(default: 500msec)
EFFECT BEAT: 32,16,8,4,3,2,1/2 (default: 1)
EFFECT LEVEL: 0-100(default: 50)
2.DELAY
EFFECT TIME: 1msec-3, 500sec(default: 500msec)
EFFECT BEAT: 32,1,3/4,1/2,1/4(default: 1)
EFFECT LEVEL: 0-100(default: 50)
3.FILTER
EFFECT BEAT: 32,16,8,4,2,1,1/2(default: 4)
EFFECT LEVEL: 0-100(default: 50)
2 types of FILTER effects (auto filter & manual filter)
AUTO FILTER: The filter frequency changes automatically to the
effect time or effect time that has been set.
MANUAL FILTER: The filter frequency can be changed with the jog
wheel.
AUTO/MANUAL FILTER switches by pushing the FILTER key more than
1.5 seconds.
|
Numark DXM01 Mixer
DXM01 The DXM01’s Sub-Bass Synthesizer looks
at the bass content of your mix, and then re-synthesizes the low end to
harmonically match. The result? You always get tight, deep bass—never
muddle. And you control the intensity—from a bit more oomph to utter
shudder. No other mixer will phatten your tracks like the DXM01 with Sub-Bass
Synthesis.
• 24-bit digital mixing
• Noise-free digital mixing controls
• Steep 3-band EQ with frequency kill
• 2 phono (w/phono defeat switch)/2 line, 1 mic
• Microphone input with 2-band EQ
• Sub-Bass synthesis with intensity cntrol
• High quality D-TYPE 100% digital crossfader with reverse switch
and continuous rotary slope control
• Look-ahead peak limiting on headphone and master outputs
• RCA record output without microphone for making mixtapes
AKG K-44 Headphones
• Affordable closed-back stereo headphones
• Soft, circumaural leatherette ear pads
• Self-adjusting headband
The K 44 stand out from all other affordable stereo headphones for
their incredible price/performance ratio and unique AKG styling. Low weight,
soft, circumaural leatherette ear pads, and a self-adjusting headband ensure
superior wearing comfort.
AKG
K-44 Service Documentation (Adobe PDF)
AKG D 88 S/XLR Microphone
Description
• Rugged performance microphone designed for lead vocals
• Available with 16 foot (5 m) XLR/XLR cable or 16 foot (5 m) XLR/jack
cable
• On/off switch
• Rugged wire mesh cap with internal protective basket
• Sturdy die-cast metal body
• Complete with stand adapter
Specification
• Polar pattern: supercardioid
• Frequency range: 40 Hz to 20 kHz
• Sensitivity: 2.5 mV/Pa
Includes
• 1 x 16ft XLR Cable
• 1 x SA 44 Stand Adapter
Download
Product Data Sheet (Adobe PDF) |
