2400+2400W Power Amplifier
Impulsive power with both channels driven: 2 x 800W (8 Ohm), 2 x 1500W (4 Ohm). 2 x 2400W (2 Ohm). Continuous power with both channels driven: 2 x 700W (8 Ohm), 2 x 1300W (4 Ohm), 2 x 1800W (2 Ohm). XLR signal inputs and outputs. Electronically balanced inputs. 4-way Speakon power outputs and binding posts. Option of parallel, mono and stereo operation. Power supply protection with miniature circuit breaker. Independent protection on each channel. Soft start. Delayed output connection. Double DC protection for speakers (relays). Output short-circuit protection. SOA protection. Clipping limiter. 8 bi-colour LEDs indicating all operating modes. Ground lift switch. Signal/noise ratio S/N under 110 dB weighting curve “A”. Frequency response 20Hz - 20kHz. Dimensions (WxHxD) 482x88x460 mm. Weight 28 kg.
Specifications
| Balanced Inputs |
|
XLR-F |
| Impulsive power both channel driven |
W RMS |
2x800W rms @ 8 Ohm 2x1500W rms @ 4 Ohm 2x2400W rms @ 2 Ohm |
| Impulsive power Bridge Mode |
W RMS |
3000W rms @ 8 Ohm 4800W rms @ 4 Ohm |
| Continuous power both channel driven |
W RMS @ THD <0.05% 1 kHz |
2x700W rms @ 8 Ohm 2x1300W rms @ 4 Ohm 2x1800W rms @ 2 Ohm |
| Continuous power Bridge Mode |
W RMS |
2600W rms @ 8 Ohm 3600W rms @ 4 Ohm |
| Input sensitivity |
|
2 Veff |
| Input impedance |
|
15K Ohm |
| Slew rate |
|
>40V/uS |
| Signal to noise ratio
S/N |
|
>110 dB curva di pesatura „A“ |
| Total harmonic distortion
THD |
(1 kHz – 4Ohm) 1W full power |
<0.02% |
| IMD |
1W full power |
<0.05% |
| Frequency response |
@ +/- 0.2dB |
20Hz-20kHz |
| Damping factor |
|
>250 @ 8 Ohm – 1kHz |
| Maximum current output |
|
80 Aeff |
| Maximum power consumption |
|
3500VA |
| Power supply voltage |
|
230 V |
| Protections |
|
DC/Termica/SOA/Soft Start |
| Cooling |
|
2 ventole a velocità variabile |
| Dimensions |
(LxAxP) mm |
482x88x460 |
| Weight |
Kg |
28 |