The New PHONIC PAA2 connects instantly to any desktop or laptop computer for easy upload and download of information and settings.

PHONIC PAA2

PHONIC PAA2 SOUND ANALYZER

PHONIC PAA2 Product Description:

The PAA2 is a highly accurate handheld audio analyzer that gives professional sound engineers a rich array of tools, including 31-band real time spectrum analysis, SPL and Line meter, internal noise generator, EQ setting program, microphone calibration and the ability to check speaker phase. All functions and menus can be accessed through a central jog dial, meaning you only need one hand to operate it. This audio assistant comes loaded with handy features like a real-time spectrum analyzer, phase test, cable test, a noise generator, a jog dial, and visible backlight to help you see your progress in dark environments. The PAA2 is a must-have tool for every serious sound engineer.

PHONIC PAA2 Product Overview:

31-band Real Time Spectrum Analyzer

Built-in calibrated measurement microphone

Sound Pressure Level Meter from 30dB~130dB

Line signal measurement display in dBu, dBV, or Voltage

A, C weighting or flat

3 level range selection for dB SPL and line signal

Line signal measuring range: dBu = -50 ~ +40dBu dBV= -52 ~ +38dBV Volts = 5mV ~ +80V

Maximum level display

Peak hold display

4 standard response times: 35ms, 125ms (F), 250ms (M), 1sec (S)

10 memories for measurement and 6 for average calculation

31-band EQ setting level display (boost/cut)

160 x 160 graphic display with back light and contrast adjustment

Phase checker

SPL meter Calibration through sound level calibrator (eg: B & K Type 4231)

Noise generator with pink noise, 1K Hz and polarity test signal, balanced output

Low power consumption for over 4 hours continuous operation with 4 AA size alkaline batteries (Adapter power supply operation available. When power is used from adapter, it automatically cuts off battery power)

3 power modes: (1) Power saving mode: Auto Off- when none of the buttons has been pressed for 15 minutes (2) Manual Off (3) Off

XLR input and output sockets

RS232 communication port, for simultaneous operation through laptop or PC

One CD-ROM with audio test signals and software for PC

PHONIC PAA2 Product Specifications:

Input/Output:
Microphone	Built-in miniature omni direction condenser microphone
Line	XLR jacks for line input and output
Data Port	3.5mm mini stereo phone jack for RS232
Display:	160X160 LCD screen with contrast adjustment and back light
SPL,dBu,dBV, Voltage	Barograph and digit display
RTA	31-band,0.5dB resolution Center frequencies ISO standard from 20Hz to 20KHz
Measurement Range:
SPL(Microphone input)	30 to 130 dB SPL
dBu(Line input)	-50 to +40 dBu
dBV(Line input)	-52 to +38 dBV
Volatge(Line input)	5 mV to 80V
Setting
Weighting	A,C or Flat
Peakhold	ON/OFF
Maximum level display	RESET
Response time	35ms,125ms,250ms,1 sec
Other function
Memory	10RTA+ 6 average calculation
Average calculation	For 10 RTA
EQ setting value display	31-band
Phase checker	Through polarity signal
Transimission	Simultaneous operation with PC or laptop through RS-232
Noise generator(Based on 6VDC power source)
Pink noise	Balanced output, -10dBu
1K Hz Signal	Balanced output,-10dBu
Polarity Signal	Balanced output,-10dBu
Power Source	4XAA battery (battery life:4hrs with alkaline battery) or external 6 VDC adapter
Dimensions(HxWxD)	144.95X82.95X39.42mm(5.7"X3.26"X1.55")
Weight(w/battery)	340g(0.74lbs)