QSC Amplifier Model PLX-2502 - Professional Power Amplifier - PLX2 Series. QSC Model PLX-2502 Now available at HollywoodDJ.

QSC Amplifier Model PLX-2502

QSC Model PLX-2502 at HollywoodDJ

The Model PLX-2502 by QSC

The PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight technology, PLX2 amplifiers combine light weight, superlative audio quality and proven QSC reliability.

The PLX2502 is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required. The PLX2502 features built-in subwoofer processing, filter switches, and front panel indications of bridge mono status.

PLX-2502 SPECIFICATIONS

8 ohms

FTC 20 Hz - 20 kHz 0.05% THD: 425 W

EIA 1 kHz 0.1% THD: 450 W

4 ohms

FTC 20 Hz - 20 kHz 0.05% THD: 675 W

EIA 1 kHz 0.1% THD: 750 W

2 ohms

EIA 1 kHz 1% THD: 1250 W

8 ohms

20 Hz-20 kHz 0.1% THD: 1400 W

EIA 1 kHz 0.1% THD: 1500 W

4 ohms

1 kHz 1% THD: 2500 W

Signal to Noise (20 Hz - 20 kHz): -106 dB

Input Sensitivity @ 8 ohms: 1.15 Vrms

Gain @ 8 ohms: 34 dB

Output Circuitry: 2-Tier Class H

Distortion (SMPTE-IM): Less than 0.02%

Typical Distortion

1/8 rated power, 20 Hz-20 kHz: Less than 0.02%

Full rated power, 20 Hz-20 kHz: Less than 0.02%

Frequency Response: 20 Hz-20 kHz, -0.5 dB

Damping Factor: Greater than 500

Input Impedance

20k ohms balanced

10k ohms unbalanced

Input Clipping 11 Vrms (+21 dBu)

Cooling: Variable-speed fan, rear-to-front air flow

Input Connectors, each channel: 3-pin XLR and 1/4" TRS balanced

Output Connectors, each channel: Neutrik® NL4 Speakon® and Touch-proof binding posts

(Both channels available on Ch 1 NL4 connector)
Rear Panel Switches:

Input Configuration: Bridge/Stereo/Parallel

Clip Limiters each channel

Filters (per channel): Top 100 Hz HPF/Full/Sub 100 Hz

LPF & 33 Hz HPF/Full (infrasonic)

Front Panel Controls

Detented Gain Attenuator: 0 to ? dB

Power On/Off

Front Panel Indicators

Clip: Red LED

-10: Green LED

Signal (-35 dB): Green LED

Power: Blue LED

Parallel: Amber LED

Bridge Mono: Amber LED

Amplifier Protection: Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection. Stable into reactive or mismatched loads

Load Protection: On/off muting, DC-fault power supply shutdown

Infrasonic: -3 dB, 5 Hz

DC fault: Power supply shutdown

Ultrasonic: -3 dB, 85 kHz

Short Circuit: Cutback

Thermal: Muting at 90° C

Over Current:

Active clip limiting

Power supply cutback

High Line: Standard +15%, survive +25%

Low Line: -33%

Dimensions: H x W x D, Rack mounting surface to rear panel 3.5" (8.9 cm) 2 rack spaces x 19" (48.3 cm) x 12.8" (32.6 cm)

Weight: 21 lbs. (9.5 kg)

QSC 1 YEAR WARRANTY

We also carry QSC Model PLX-3102