| A line of amplifiers
that defines high impact. Up to 3,400 watts in a 2 rack-unit chassis that's
only 13" deep and 21 lbs. We included our exclusive PowerWave Technology
used in our award-winning PowerLight Series for chest-pounding bass and
crystal-clear highs. It also features hum-free noise floor and ultra-low
distortion of .03% THD. To keep PLX running under the most demanding conditions,
we've even added our Advanced Thermal Management System. PLXs offer the
reliability of a company that's been building professional amplifiers for
over 30 years. FEATURES
- Exclusive PowerWave power supply
for superior bass and lighter weight
- Ultra-low distortion (0.03% THD
at 8 ohms) & studio-quality noise floor (-107 dB)
- LED indicators include bridge
mono and parallel input modes
- Compact 2 RU, 21 lbs. and 13"
deep chassis fits into any rack
- Class H output reduces AC power
draw and heat by 40% (2402, 3002, & 3402)
- Selectable clip limiters and
subsonic filters reduce distortion and protect speakers
- Variable-speed fan for low noise
and solid 2 ohm performance
- Both 1/4" TRS & XLR
inputs, Speakon&trade and shock-proof binding post outputs
- 3-year warranty plus optional
3-year extension available
|
|
PLX
SPECIFICATIONS |
PLX1202
|
PLX1602 |
PLX2402 |
PLX3002 |
PLX3402
|
|
STEREO
MODE, Both Channels Driven |
| 8
ohms 20 Hz-20 kHz 0.03% THD |
200W |
300W |
425W |
550W |
700W |
| 4
ohms 20 Hz-20 kHz 0.05% THD |
325W |
500W |
700W |
900W |
1100W |
| 2
ohms 1 kHz 1% THD |
600W |
800W |
1200W |
1500W |
1700W |
|
BRIDGE
MONO MODE |
| 16
ohms 20 Hz-20 kHz 0.1% THD |
400W |
600W |
850W |
1100W |
1400W |
| 8
ohms 20 Hz-20 kHz 0.1% THD |
700W |
1100W |
1500W |
2000W |
2200W |
| 4
ohms 1 kHz 1% THD |
1200W |
1600W |
2400W |
3000W |
3400W |
| Signal
to Noise (20 Hz-20 kHz) |
<-106 dB |
<-107 dB |
<-108 dB |
<-107 dB |
<-107 dB |
| Input
Sensitivity @ 8 ohms |
1.0Vrms |
1.2Vrms |
1.5Vrms |
1.7Vrms |
1.9Vrms |
| Input
Sensitivity @ 4 ohms |
0.9Vrms |
1.1Vrms |
1.3Vrms |
1.5Vrms |
1.7Vrms |
| Voltage
Gain |
40x (32 dB) |
40x (32 dB) |
40x (32 dB) |
40x (32 dB) |
40x (32 dB) |
| Output
Circuitry |
AB |
AB |
2-Step
Class H |
2-Step
Class H |
2-Step
Class H |
Power
Requirements
(1/8 Power Pink Noise @ 4 Ohm) |
6A |
10A |
8A |
10A |
12A |
|
ALL
MODELS |
| Distortion
(SMPTE-IM) |
Less
than 0.01% |
Distortion
(Typical)
20 Hz-20 kHz: 10 dB below rated power
1.0 kHz and below: full rated power |
.
Less than 0.01% THD
Less than 0.01% THD |
| Frequency
Response |
20
Hz-20 kHz, +/- 0.2 dB / 8 Hz-50 kHz, +0, -3 dB |
| Damping
Factor |
Greater
than 500 |
| Input
Impedance |
6
k ohms unbalanced, 12 k ohms balanced |
| Input
Clipping |
10
Vrms (+22 dB) |
| Cooling |
Variable-speed
fan, rear-to-front air flow |
| Connectors,
each channel |
Input:
3-pin XLR & 1/4" TRS balanced
Output: Neutrik Speakon(TM) and touch-proof binding posts |
| Amplifier
Protection |
Full
short circuit, open circuit, thermal, ultrasonic, and RF protection
Stable into reactive or mismatched loads |
| Load
Protection |
On/off
muting, DC-fault power supply shutdown |
| Dimensions |
19"
(48.3 cm) rack mounting, 3.5" (8.9 cm) tall (2 rack spaces)
13.25" (33.7 cm) deep (from front mounting rails) |
| Gain |
40x (32 dB) |
| Weight |
21
lb (9.5 kg) net, 27 lb (12.3 kg) shipping |
| All
Specification Subject to Change Without Notice. |
|
Specifications subject to change without notice
|
| * Free shipping is ground shipping and
applies to online orders only |
