Art TUBEMPUSB Project Series Microphone Audio Interface with USB Output

MPN: TUBEMPUSB
$139.99
Availability: Out of Stock
SKU
H-ART-TUBEMPUSB
Features:

  • USB Interface Output.
  • Extremely Low Noise Discrete Front End.
  • Up to 70dB of Clean, “Musical” Gain.
  • High Output Signal Drive Capability.
  • Fast FET Limiter to Prevent Overload.
  • Switch Selectable Input Impedance.
  • Precision LED Metering.
  • Built-in Low Noise Phantom Power Supply.
  • Compact, Stackable all Aluminum Chassis.
  • XLR and 1/4″ Inputs and Outputs.

The Tube MP Project Series is a professional quality audio interface that lets you connect a microphone, instrument, and line-level signals to audio inputs to digital audio workstations as well as standard analog devices. We took our legendary Tube MP series and updated every aspect of the design, inside and out, while still maintaining a compact, reliable, cost-effective product, and added a USB output.

From the new all-aluminum stackable chassis to the precision LED level metering circuitry, we have improved virtually every aspect of our already successful Tube MP series and added USB connectivity.

USB (Universal Serial Bus) is a common hardware interface used for quick and easy connection of peripherals like the ART USB TUBE MP. The TUBE MP features a single Type B USB peripheral connector on the rear panel for outputting audio over USB to your computer. One of the nice features of USB is its Hot Swapping capability, allowing the Tube MP to be connected and disconnected without turning your computer off. The ART USB TUBE MP is fully USB 1.1 compliant, operating under Windows 98SE/ME/2000/XP/Vista, as well as Mac OS 9.1 or newer.

Product Specifications:

Frequency Response: 10Hz – 40KHz, +/-1 dB (typical)

Dynamic Range: >100dB (20Hz to 20KHz)

THD: <0.05% (typical)

CMRR: >60dB (typical)

EIN: <-130dB (XLR to XLR A-weighted)

Max. Input Level: +17dBu (1/4”), +16dBu (XLR)

Max. Output Level: +20dBu (1/4”), +26dBu (XLR)

Input Connections: 1/4” TRS unbalanced (1meg Ohm),

XLR female balanced:

Output Connection: 1/4” TRS unbalanced (600 Ohm),

XLR male balanced: (<300 Ohm)

Max. Gain: 0dB (XLR - XLR), +50dB (1/4”- XLR)

Input Gain Pad: Switchable, 20dB

XLR Input Impedance: Switchable, 4.7k Ohms / 600 Ohms

Low Cut Filter: Switchable, -3dB @ 40Hz

Output Phase: Switchable, Normal/Invert

Output Limiter Type: Switchable, Fast & Musical FET limiter, >20dB limit range

Phantom Power: Switchable, +48V DC, filtered, current limited

Signal Metering: Precise LED array with a fast attack and moderate release

Tube Type: 12AX7A hand selected

Chassis Type: Aluminum Anodized with integral/ stackable rubber sides

Power Requirements: 10Volts AC @ 700mA (typical)

Dimensions: 1.75”H x 5.9”W x 6.5”D (44.5mm x 150mm x 165mm)

Weight: 2.5 lbs. (1.14 kg)

More Information
BRAND ART
Manufacturer Part Number TUBEMPUSB
Condition new
height 1.75
length 6.5
width 5.9