DAS Audio 2X Vantec 20A Speakers + Event 121A Powered Subwoofer + TRD-6 Steel Ring Lock With Pole Mount
- 2x VANTEC-20A, 2-way Powered Curved Source Speaker.
- 1 EVENT-121A, Powered Subwoofer.
- 1 TRD-6 Fixed Height Steel Ring Lock Satellite Pole with Standard Pole Mount.
This is Bundle of 2, VANTEC-20A 2-way Powered Curved Source Speaker, 1, EVENT-121A Powered Subwoofer, 1, TRD-6 Fixed Height Steel Ring Lock Satellite Pole with Standard Pole Mount.
The VANTEC-20A is an active curved source line array that incorporates an arsenal of hi-tech solutions designed to provide the versatility needed by today’s sound hire professionals. Whether it be stacked on the VANTEC-118A companion subwoofer, flown in a compact array, or used alone on a speaker stand, the VANTEC-20A can be used effectively in an incredible number of applications that include corporate A/V, mid-size sound reinforcement, and permanent installation.
Designed for use in arrays of up to 5 units, the VANTEC-20A is ideal for applications where the power and long-throw characteristics of large line arrays are not needed. Fast and simple deployment is guaranteed thanks to the exclusive DAS Click-Lock rigging hardware which allows the system to be securely flown from or stacked on the VANTEC-118A.
Individual units can be mounted on tripods with precise aiming possible thanks to the variable angle pole mount which allows for 13.5º up or down tilt. The DAScontrol interface allows users to easily configure the VANTEC-20A I systems for use individually or in combination with other units.
Selectable high pass filter presets facilitate alignment with the VANTEC-18A and VANTEC-118A active bass systems without external processing. Throw compensation settings and array size selection can all be handled simply via the DAScontrol interface.
When the VANTEC-20A is used individually, the DASlin APP can be used to stream music in high definition stereo and remotely control the functions of the system.The enclosure is manufactured using Baltic birch plywood and finished with the DAS ISO-flex coating. Power is supplied by a cutting-edge 1500 W peak Class D amplifier in a bi-amplified configuration driving a single DAS 12F4C loudspeaker and twin M-60 compression drivers.
The EVENT-121A is a direct radiating rear-loaded powered subwoofer system that incorporates a single 21″ neodymium loudspeaker providing “earth-moving” low-frequency reproduction for the EVENT Series line arrays. The combination of direct radiation and rear-loading provides high output, tight and accurate sub-bass response.
The EVENT-121A employs the new DAS 21LFN loudspeaker which offers impressive features such as a 4″ sandwich split winding voice coil, a powerful FEA optimized neodymium magnet assembly and an FEA optimized suspension system with double silicon spider. The result is a loudspeaker with exceptional sensitivity, high power handling capacity and a quality suspension design capable of withstanding the stress and mechanical fatigue of today´s high-power pro audio systems.
An aluminum demodulating ring benefits lower distortion and effective forced ventilation of the voice coil gap provides for a high thermal rating and reduced power compression. The EVENT-121A electronics package includes a 3200 W peak Class D amplifier and 24-bit high-end DSP for top quality audio reproduction. On the rear panel, controls can be found for gain, polarity and a continually variable low-pass filter which ranges from 63 Hz to 100 Hz.
A unique “cardioid preset” button simplifies the use of subs in cardioid configurations, making the setup of two to three units a snap without the need for an external DSP. The EVENT-121A is phase response coherent with the EVENT-208A, EVENT-210A and EVENT-212A active tops offering precise alignment. Two balanced inputs with stereo filtered outputs that can be switched to pass-through connections are provided.
Ring lock pole mount. Dimensions H: 750 mm, expanding mandrel system: ø 35-37 x 102 mm.