This is the Bundle of 3 Products RED 16LINE, REDNET AM2, REDNET X2P. You can save up to 600$ against this bundled product. You can grab this product before the date of 31st May 2020 on this special discount.
Red 16Line is a 64-in/64-out Pro Tools. HD and dual Thunderbolt 3 audio interface with ultra-low latency A-D/D-A conversion, Red Evolution mic preamps, up to 121dB dynamic range, ultra-low round trip latency, and expansion over Ethernet for networked audio. Since Red 16Line provides both DigiLink connectors and Thunderbolt connections, it is now easier than ever to switch from Pro Tools. HD to a second DAW, without the need to reconfigure option cards in the interface. Simply change the host mode either in the remote-control software or on the device front panel and change DAWs in seconds.
RedNet AM2 is a compact, Power-over-Ethernet (PoE) -supplied stereo analogue output device for any Dante audio-over-IP network. Featuring a powerful headphone amp, capable of driving both high and low impedance headphones, RedNet AM2 is the ideal signal monitoring device to add extra functionality to your audio network.
A pair of rear-panel XLR outputs offers line-level signals of up to 24dBu with top panel level control and mute switch, while the front panel 1/4-inch headphone output is capable of driving high signal levels perfect for monitoring in high-SPL environments. The bottom of the sturdy aluminium and steel chassis features a threaded mic stand boss allowing RedNet AM2 to be placed in any convenient location whether on a desk or at a performer fingertip on a stand. Finally, the IEEE standard PoE input allows a single Ethernet cable to provide power, remote control, clocking and audio data to RedNet AM2.
RedNet X2P is a compact, portable and robust 2x2 Dante audio interface featuring two Red Evolution mic pres, stereo line out and a stereo headphone amplifier. RedNet X2P allows you to effortlessly add a high-quality Dante audio interface by integrating power, audio, clock and remote control over a single Ethernet cable – simply use a power over Ethernet switch or PoE injector. A local input mixer allows 'more me' monitoring control, while a control lockout mode ensures settings cannot be changed when used remotely.
Rear panel XLR outputs offer level-controlled analogue outputs of up to 24dBu, while a front-panel 1/4" connector provides a high-powered headphone output capable of driving both high and low impedance headphones. A pair of combination XLR/1/4" inputs allow the connection of mic, line or instrument level signals to the mic pres, which include Focusrite's acclaimed Air mode which emulates the sound of our classic input transformers. The top panel features an array of controls: output level for headphone and line outputs, mic pre controls of gain, high-pass filter, Air, phase invert, phantom power and stereo linking; as well as the crossfader for controlling the balance of mic pre inputs and network receiver channels which to be sent to the headphone or line outputs.
Power PSU: 1 x Internal, 100-240V, 50/60Hz, consumption 120W.
Operating Temperature: Operates at up to an ambient temperature of 40 degrees Celcius.
Height: 44mm/ 1.73"
Width: 483mm/ 19.02"
Depth (Chassis Only): 340mm/ 13.39"
Power Over Ethernet (PoE): Complies with IEEE 802.3af class 0 Power-over-Ethernet standard.
DC Power Supply: 1 x 12V 1.2A DC Power Supply
Power Consumption: PoE: 11.0W - DC: 9.8W
Height: 58mm/ 2.28"
Width: 140mm/ 5.51"
Depth: 116mm/ 4.57"
Power Over Ethernet (PoE): Complies with IEEE 802.3af class 0 Power-over-Ethernet standard (PoE A or PoE B compatible).
DC Power Supply: 1 x 12V 1.2A DC Power Supply.
Power Consumption: PoE: 11.0W - DC: 13.32W (When using supplied DC PSU).
Operating Temperature: Operates at up to an ambient temperature of 45 degrees Celcius.
Height (Chassis Only): 47.5mm/ 1.87"
Width: 140mm/ 5.51"
Depth (Chassis Only): 104mm/ 4.09"
|Manufacturer Part Number||Project Studio Bundle|