Open Box - QSC E112, 12 Inches 2-Way Externally Powered, Live Sound Reinforcement Loud Speaker - Black

MPN: E112

Free 2nd Day Air Shipping!


  • Open Box 
  • Rugged tour-grade textured paint
  • Foam-lined perforated steel grill
  • Suitable for main PA and stage monitor
  • Available U-Style Yoke and M8 rigging kit for permanent installation
  • Dual angle pole socket

The E112 is a compact, two-way loudspeaker with a 12-inch, die cast frame woofer with a 2.5-inch voice-coil housed in a multi-purpose enclosure that’s at home in stage monitor or main PA deployment. It incorporates QSCs DMT Directivity Matched Transition design with a wide 85 degrees coverage. When used as a stage monitor, the E112 is angled up at a 55 degrees angle allowing it to be placed near the performer when used on a crowded stage.

E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC Tpuch Mix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke. 

Product Specifications:

Configuration: 1 × 12-inch, 2-way, non-powered

Frequency Response (-6 dB): 68Hz – 20kHz

Frequency Range (-10 dB): 50Hz - 20kHz

Power capacity² continuous/peak: 300 W / 1200 W

Sensitivity: 95 dB, 1 W @ 1 m

Coverage Angle: 85° conical DMT

Output1 (Peak SPL @ 1m): 126 dB

LF: 254 mm (10 in) driver with 64 mm (2.5 in) voice coil.

HF: 25 mm (1 in) exit, 45 mm (1.75 in) voice coil, compression driver

Nominal Impedance:

Cross-over: Full-range only, 1.8 kHz

Input Connections: 2 × NL4, 1 × barrier strip

Enclosure: Multi-angle plywood, black texture paint finish. One top-mounted handle. Perforated, powder-coated steel grille with foam lining.

Mounting and suspension: 9 × M8 suspension points, dual angle, 35 mm pole-socket

Speaker Dimensions (W×H×D): 360 × 616 × 371 mm/14.2 × 24.2 × 14.6 in

Carton Dimensions (H×W×D):    460 × 460 × 712 mm/ 18 × 18 × 28 in

Net speaker weight: 23 kg / 50 lb

Shipping weight: 25 kg / 50 lb

More Information
Condition new
Manufacturer Part Number E112