The 3,000 Watt Subwoofer is a powered 18inch dual ported bandpass enclosure that is optimally tuned for extended low frequency response. Designed to work individually without a controller, the subwoofer provides very high output FOH performance and is ideally suited for a wide range of music and live sound reinforcement applications.
The Subwoofer features a powerful, double suspension 18inch low frequency driver that utilizes a specialized inside and outside wound voice coil for higher magnetic density, better heat dissipation, high power handling capacity, and improved efficiency. For its size and operating bandwidth, the Subwoofer delivers an extremely high output that is virtually distortion free even in the most demanding applications.
Output power for the NuQ118B-AN-WH is provided by means of an efficient and lightweight KLARK TEKNIK 3,000-Watt Class-D power amplifier. A sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP) provides dynamic EQ for impressive low frequency response at low volume levels and transparent limiting for clarity at high output levels – and for long-term reliability.
On the rear panel of the amplifier module, the user interfaces? The LCD display and single rotary encoder provide intuitive access to: position compensation, user EQ control, crossover alignment, and signal routing features. In addition to the balanced XLR input, an XLR output is provided for daisy-chaining more active subwoofers, or for use with active full range satellite speakers. An onboard USB port provides access for remote control of the NuQ118B-AN-WH via PC computer, as well as DSP firmware updates.
ULTRANET connectivity is provided by two locking etherCON connectors. Up to 16 independent channels of 24-bit digital audio and control data are transmitted via a single CAT5 cable between compatible digital devices – including mixers, I/O stage boxes, powered loudspeakers, and personal monitoring systems. Simplified cable routing and ease of setup translate directly into significant time saved during installation.
Finished in a highly durable semi matt white paint, the cabinet is constructed from 18 mm (¾ ") birch plywood and includes: multiple M10 threaded rigging points; a 35 mm pole socket for satellite speaker mounting; integrated carry handles for convenient transport – and high impact interlocking corners for ground stacking stability. Mains power input is provided via a Neutrik powerCON connector.
Frequency Response: 40 Hz – 150 Hz ±3 dB , 33 Hz – 150 Hz -10 dB
Nominal Dispersion: Half Space
Maximum SPL: 136 dB peak
Crossover Type: Active
Transducers: 1 x 18" (460 mm) LF driver
Limiter: Peak and RMS
Maximum Output Power: 3000W
Protection: Short circuit, thermal
Dimensions (HWD): 773 x 579 x 700 mm (30.4 x 22.8 x 27.6")
Net weight: 57.9 kg (127.5 lbs)
Construction: 18 mm (¾") birch plywood
|Manufacturer Part Number||NUQ118BANWH|