ONLY 1 LEFT!
Ships today from Los Angeles, CA
- Wider targets aperture for a greater degree of ambiance (audience response, talk shows, live concerts).
- Narrow pickup angle.
- Unmatched quality of off-axis rejection.
- State-of-the-art preamplifier redesign.
- Superior RF immunity.
- Internal low-frequency roll-off.
- Recessed low-cut filter switch for additional control.
- Smaller footprint.
The Shure VP89M is a Medium Condenser Shotgun Microphone with a Case and Foam Windscreen. Premium modular shotgun microphone offers superior preamplifier design with RF immunity for pick-up of audience response, talk shows, and concerts. The product includes a low-cut filter switch, wide pickup angle, and unmatched off-axis rejection.
Form Factor: Stand/Boom Mount
Sound Field: Mono
Operating Principle: Pressure Gradient
Capsule: 1 x Electret Condenser
Polar Pattern: Hypercardioid, Lobar
Orientation: End Address
High-Pass Filter: 200 Hz, 12 dB/Octave
Tone Adjustment: None
On-Board Controls: High-Pass Filter
Windscreen: Foam (Included)
Frequency Range: 50 Hz to 20 kHz
Maximum SPL: 132 dB SPL (1 kHz, 1% THD, 2.5-Kilohms Load), 128.5 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)
Impedance: 115 Ohms
Load Impedance: 1000 Ohms
Sensitivity: -33.5 dBV/Pa at 1 kHz (Open Circuit Voltage, 1 kHz)
Output Level: 4 dBV (Max)
Signal-to-Noise Ratio: 79 dB A-Weighted
Equivalent Noise Level: 15 dB A-Weighted
CMRR: 70 dB
Output Connectors (Analog): 1 x XLR 3-Pin Male
Headphone Connector: None
Operating Voltage: 11 to 52 V (Phantom Power)
Operating Current Consumption: 2 mA
Mounting: Mic Clip, Shockmount (with Optional Hardware)
Construction Material: Aluminum, Stainless Steel
Operating Temperature: 0 to 135°F / -17.78 to 57.22°C
Operating Humidity: 0 to 95%
Storage Temperature: -20 to 165°F / -28 to 73°C
Weight: 4.9 oz / 138.92 g
|Manufacturer Part Number||VP89M|