The Yorkville Sound NX750P-2 is a 2-Way Powered Loudspeaker represents the culmination of all Yorkville's research and development in-molded technology to this point. The injection-molded, the internally multi-fin-braced enclosure supports a high-performance 15" high-powered woofer and rotatable 80° x 50° custom ABS waveguide horn, all protected by a perforated metal grille. A rugged carrying handle, speaker stand socket and reinforced threaded fly points are also built-in.
Innovative bi-amplified power module uses a two-tier class H linear technology to produce loud clean transients to match the high output of the woofer. Its two-tier design technology is lower in weight and more efficient than conventional amplifiers while providing higher headroom and lower operating temperature - a perfect solution for powering the top end.
A newly designed switch-mode amplifier drives the woofer in the NX750P-2. The amplifier uses Class D switching technology, in part to reduce overall weight - it also runs cooler. Class D technology is similar to the power supply found in the trend-setting Elite EF500P's amplifier. Of particular significance is this technology's inherently low heat production which ensures reliability in a wide range of environments. Then the NX750P-2's combination of neodymium woofer magnetics and lightweight composite enclosure materials further ensure that all this remarkable performance comes in a lightweight, durable package.
A "loop" output allows multiple NX750P-2s to be interconnected with mic or patch cables and controlled by one cabinet's mixer stage or direct line input. Here's another versatile trick - you can combine NX750P-2's using the mixer inputs on each cabinet and coupling the loop outputs to provide a complete, easy-to-use PA with its own microphone inputs and line inputs for background music or other audio. It's ideal for duos in small clubs, also presentations or teaching applications. Many NX750P-2's can be linked together but a maximum of three "mixers" can be active at any one time making three mic sources and six line sources available in any three-or-more-cabinet arrays. The trim control allows looped cabinets to be individually adjusted in level. Finally, the microphone input has bass and treble equalization and a 100Hz selectable high-pass filter appropriate for vocal-only applications or to let you add NX or Elite powered subwoofers, without a crossover.
Acoustic performance is ultimately the most important factor in any loudspeaker. The NX750P-2 offers 134dB (Peak) of maximum sound pressure potential and a wide, smooth audio range to ensure fidelity throughout the audience area.
System Type: 2-Way
Active or Passive: Active
Program Power (Watts): 750 Watts (1600 Watts Peak)
Biampable: Self Powered
Max SPL (dB): 133dB Peak (127dB Continuous)
Frequency Response (Hz +/- 3dB): 50 - 26k
Crossover Frequency (Hz): 1400
Driver Configuration: 15-inch / 1.5-inch
Power Cable: Yes
Power Switch: Yes
EQ Controls: 100Hz HP Filter (LF Rolloff)
LED Indicators: Power/Clip/Limit
Dimensions (DWH xbackW, inches): 15 x 22 x 32 x 9.5
Weight (lbs/kg): 62 / 28
|Manufacturer Part Number||NX750P-2|